HP ProLiant BL465c Gen8 Maintenance And Service Manual Download Page 61 | Manualshive

Page: 61 / 82

background image

Diagnostic tools 61

HP Insight Diagnostics

HP Insight Diagnostics is a proactive server blade management tool, available in both offline and online
versions, that provides diagnostics and troubleshooting capabilities to assist IT administrators who verify

server blade installations, troubleshoot problems, and perform repair validation.
HP Insight Diagnostics Offline Edition performs various in-depth system and component testing while the OS

is not running. To run this utility, boot the server blade using Intelligent Provisioning.
HP Insight Diagnostics Online Edition is a web-based application that captures system configuration and

other related data needed for effective server blade management. Available in Microsoft Windows and

Linux versions, the utility helps to ensure proper system operation.
For more information or to download the utility, see the HP website Insight Diagnostics Online Edition is also available in the SPP. For more information, see the HP website

HP Insight Diagnostics survey functionality

HP Insight Diagnostics (on pa ge

) provides survey functionality that gathers critical hardware and software

information on ProLiant server blades.
This functionality supports operating systems that are supported by the server blade. For operating systems

supported by the server blade, see the HP website If a significant change occurs between data-gathering intervals, the survey function marks the previous

information and overwrites the survey data files to reflect the latest changes in the configuration.
Survey functionality is installed with every Intelligent Provisioning-assisted HP Insight Diagnostics installation,

or it can be installed through the SPP.

Active Health System

HP Active Health System provides the following features:

•

Combined diagnostics tools/scanners

•

Always on, continuous monitoring for increased stability and shorter downtimes

•

Rich configuration history

•

Health and service alerts

•

Easy export and upload to Service and Support

The HP Active Health System monitors and records changes in the server hardware and system configuration.

The Active Health System assists in diagnosing problems and delivering rapid resolution when server failures

occur.
The Active Health System collects the following types of data:

•

Server model

•

Serial number

•

Processor model and speed

•

Storage capacity and speed

«
...
59
60
61
62
63
...
»

Summary of Contents for ProLiant BL465c Gen8



















































































Reviews:

No comments

Related manuals for ProLiant BL465c Gen8

BladeCenter HS23

Brand: IBM Pages: 28

NECCare Platinum Express5800/A1160

Brand: NEC Pages: 4

NECCare Gold Express5800/320Fd

Brand: NEC Pages: 11

NEC Express5800/R120d-2E

Brand: NEC Pages: 39

UNIVERGE NEAX 2000 IPS

Brand: NEC Pages: 244

UNIVERGE NEAX 2000 IPS

Brand: NEC Pages: 191

UNIVERGE NEAX 2000 IPS

Brand: NEC Pages: 96

Brand: Panasonic Pages: 31

Brand: SEH Pages: 50

SpycerNode 2U12

Brand: R&S Pages: 136

Brand: IBM Pages: 56

System x3350 Type 4192

Brand: IBM Pages: 84

Brand: ImageTech Pages: 44

N2400 - TaskSmart - 1 GB RAM

Brand: Compaq Pages: 372

NovaScale R410B F2

Brand: Bull Pages: 38

RS/6000 44P Series 270

Brand: IBM Pages: 346

SuperServer 6029U-TR25M

Brand: Supermicro Pages: 151

376227-B21 - ProLiant InfiniBand 4x Fabric Copper Switch

Brand: HP Pages: 169

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands