Hardware options installation 39
o
Route the cable along the right DIMM baffle and connect the cable to the SAS controller.
o
Route the cable along the left DIMM baffle and connect the cable to the mezzanine option.
6.
Install the access panel (on page
7.
Install the server blade ("
" on page
HP Trusted Platform Module option
Use these instructions to install and enable a TPM on a supported server blade. This procedure includes three
sections:
1.
Installing the Trusted Platform Module board (on page
2.
Retaining the recovery key/password (on page
3.
Enabling the Trusted Platform Module (on page
Enabling the TPM requires accessing RBSU ("
" on page
). For more
information about RBSU, see the HP website TPM installation requires the use of drive encryption technology, such as the Microsoft Windows BitLocker
Drive Encryption feature. For more information on BitLocker, see the Microsoft website
CAUTION:
Always observe the guidelines in this document. Failure to follow these guidelines
can cause hardware damage or halt data access.
When installing or replacing a TPM, observe the following guidelines:
Summary of Contents for ProLiant BL460c Gen8
Page 67: ...Regulatory compliance notices 67 Taiwan notices ...
Page 76: ...Technical support 76 ...
Page 77: ...Technical support 77 ...
