HP ProLiant BL p-Class F-GbE User Manual Download Page 31 | Manualshive

Page: 31 / 67

background image

HP ProLiant BL p-Class C-GbE2 Interconnect Kit Regulatory Compliance Notices 31

European Union Regulatory Notice

This product complies with the following EU Directives:

•

Low Voltage Directive 73/23/EEC

•

EMC Directive 89/336/EEC

CE Compliance of this product is valid only if powered with the correct HP-provided and CE marked AC adapter.

If this product has telecommunication functionality, it also complies with the essential requirements of:

•

R&TTE Directive 1999/5/EC

*For a notified body number refer to the product regulatory label.

Compliance with these directives implies conformity to harmonized European standards (European Norms) which are
listed on the EU Declaration of Conformity issued by Hewlett-Packard for this product or product family.

The telecommunications functionality of this product may be used in the following EU and EFTA countries:

Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovak
Republic, Slovenia, Spain, Sweden, Switzerland, and United Kingdom.

Notice for use in France and Italy

Italy:

E'necessaria una concessione ministeriale anche per l'uso del prodotto. Verifici per favore con il proprio distributore
o direttamente presso la Direzione Generale Pianificazione e Gestione Frequenze.

License required for use. Verify with your dealer or directly with General Direction for Frequency Planning and
Management (Direzione Generale Pianificazione e Gestione Frequenze).

France:

L'utilisation de cet equipement (2.4GHz Wireless LAN) est soumise a certaines restrictions: Cet equipement peut etre
utilise a l'interieur d'un batiment en utilisant toutes les frequences de 2400 a 2483.5MHz (Chaine 1-13). Pour une
utilisation en environement exterieur, vous devez utiliser les frequences comprises entre 2454-2483.5MHz (Chaine
10-13). Pour les dernieres restrictions, voir

http://www.art-telecom.fr

.

For 2.4 GHz Wireless LAN operation of this product certain restrictions apply: This product may be used indoor for
the entire 2400-2483.5 MHz frequency band (channels 1-13). For outdoor use, only 2454-2483.5 MHz frequency
band (channels 10-13) may be used. For the latest requirements, see

http://www.art-telecom.fr

.

Notice for products incorporating 5GHz Wireless LAN devices

Frequency availability for 802.11a or 802.11h Wireless LAN is not currently harmonized throughout the European
Union. For compliance requirements, users should verify with their supplier, local HP office or Telecommunications
authority.

«
...
29
30
31
32
33
...
»

Summary of Contents for ProLiant BL p-Class F-GbE




































































Reviews:

No comments

Related manuals for ProLiant BL p-Class F-GbE

Brand: Barksdale Pages: 5

SmartPro DGS-1500-20

Brand: D-Link Pages: 113

xStack DGS-3120 Series

Brand: D-Link Pages: 1150

Brand: Brightlink Pages: 33

Brand: wavin Pages: 4

Infinity IES-1881

Brand: LevelOne Pages: 2

Brand: Hall Technologies Pages: 35

EdgeSwitch 10 XP

Brand: Ubiquiti Pages: 13

Raritan Dominion LX II

Brand: LEGRAND Pages: 7

Brand: Aastra Pages: 52

Brand: Cardin Elettronica Pages: 2

Brand: SignaMax Pages: 2

Brand: TRENDnet Pages: 16

S5120-EI Series

Brand: H3C Pages: 29

Brand: H-Tronic Pages: 15

Brand: Allied Telesis Pages: 56

iConverter GX/X

Brand: Omnitron Systems Technology Pages: 2

Brand: Maiwe Pages: 14

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands