HP X122 1G SFP LC BX-U
Transceiver
(J9143B)
A small form-factor
pluggable (SFP) Gigabit-BX
(bi-directional) "upstream"
transceiver that provides a
full-duplex Gigabit solution
up to 10 km on one strand
of single-mode fiber. The
J9143B connects to the
J9142B "downstream"
transceiver, or to any IEEE-
standard 1000BASE-BX10-
D ("downstream")
device.
Ports
1 LC 1000BASE-BX10 port (IEEE 802.3ah Type 1000BASE-BX10-U); Duplex:
full only
Physical characteristics
Dimensions
2.19(d) x 0.54(w) x 0.46(h) in. (5.57 x 1.37 x 1.18
cm)
Weight
0.04 lb. (0.02 kg)
Environment
Operating temperature
32ºF to 158ºF (0ºC to 70ºC)
Operating relative
humidity
0% to 95%, non-condensing
Non-operating/
Storage temperature
–40ºF to 185ºF –40ºC to 85ºC)
Cabling
Type:
Single-mode fiber optic, complying with ITU-T G.652;
Maximum distance:
0.5-10,000 m (single-mode fiber)
Notes
Transmit wavelength: 1310 nm. Receive wavelength: 1490 nm.
For supported platforms and minimum software requirements to support this
product, see the document titled "Support for the HP BX Transceivers" on the
"HP Mini-GBICs and SFPs" Manuals Web page.
The J9143B connects to the J9142B "downstream" transceiver, or to any IEEE-
standard 1000BASE-BX10-D ("downstream") device. (A 1000-BX-U
transceiver can only connect to a 1000-BX-D product. You cannot connect two
1000-BX-U transceivers together.)
Power consumption is 1 watt maximum.
Services
Refer to the HP website at:
www.hp.com/networking/services
for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
HP X130 CX4 Optical
Media Converter
(J8439A)
An optical media converter
that connects to CX4 ports,
providing 10-Gigabit
connectivity up to 300 m
on multimode fiber.
Physical characteristics
Dimensions
2.83(d) x 0.98(w) x 0.59(h) in. (7.19 x 2.49 x 1.5
cm)
Weight
.06 lb. (0.03 kg)
Cabling
Maximum distance:
• 62.5 µm multimode cable @ 150 MHz*km = 1-50 m
• 50 µm multimode cable @ 500 MHz*km = 1-100 m
• 50 µm multimode cable @ 2000 MHz*km = 1-300 m
Notes
Duplex: full
The CX4 Media Converter connects directly to the CX4 port, and a 12-strand
multimode ribbon cable is used between CX4 Media Converters.
The 12-strand multimode ribbon cable can have either 62.5 or 50 micron core
diameters, terminated by standard Multiple Terminations Push-pull Latch
(MTP) connectors in a crossover configuration. The ribbon cables are known as
Multi-fiber Push (MPO).
Users should specify a "crossover" (often called "key up/key up")
configuration for the ribbon cable. Also, specify female-female cables to
connect to ProCurve 10-GbE CX4 Media Converters.
For a suggested vendor of MPO ribbon cables, please see the "Cabling"
QuickSpecs
HP 3500 and 3500 yl Switch Series
Accessory Product Details
DA - 13282 North America — Version 20 — January 17, 2014
Page 46
