HP PROCURVE 2910AL, Specifications

Page: 7 / 9

7
HP ProCurve 2910al Switch Series
Specifications
HP ProCurve 2910al-24G-PoE+ Switch (J9146A) HP ProCurve 2910al-48G-PoE+ Switch (J9148A)
Ports
20 RJ-45 auto-sensing 10/100/1000 ports (IEEE 802.3 Type 10Base-T, IEEE
802.3u Type 100Base-TX, IEEE 802.3ab Type 1000Base-T); Media Type:
Auto-MDIX; Duplex: 10Base-T/100Base-TX: half or full; 1000Base-T: full only
4 dual-personality ports; each port can be used as either an RJ-45
10/100/1000 port (IEEE 802.3 Type 10Base-T; IEEE 802.3u Type
100Base-TX; IEEE 802.3ab 1000Base-T Gigabit Ethernet) or as a mini-GBIC slot
(for use with mini-GBIC transceivers
1 RJ-45 serial console port
Supports a maximum of 4 10-GbE ports, with optional module
44 auto-sensing 10/100/1000 ports (IEEE 802.3 Type 10Base-T, IEEE 802.3u
Type 100Base-TX, IEEE 802.3ab Type 1000Base-T); Media Type: Auto-MDIX;
Duplex: 10Base-T/100Base-TX: half or full; 1000Base-T: full only
4 dual-personality ports; each port can be used as either an RJ-45
10/100/1000 port (IEEE 802.3 Type 10Base-T; IEEE 802.3u Type
100Base-TX; IEEE 802.3ab 1000Base-T Gigabit Ethernet) or as a mini-GBIC slot
(for use with mini-GBIC transceivers)
1 RJ-45 serial console port
Supports a maximum of 4 10-GbE ports, with optional module
Physical characteristics
Dimensions
14.4(d) x 17.4(w) x 1.73(h) in. (36.58 x 44.2 x 4.39 cm) (1U height) 14.4(d) x 17.42(w) x 1.73(h) in. (36.58 x 44.25 x 4.39 cm) (1U height)
Weight
12.34 lb. (5.6 kg) 12.96 lb. (5.88 kg)
Memory and processor
Processor
Dual ARM1156T2S @ 515 MHz, 4 MB flash ROM, 1 GB flash, 512 MB
SDRAM; packet buffer size: 6 MB Dual ARM1156T2S @ 515 MHz, 4 MB flash ROM, 1 GB flash, 512 MB
SDRAM; packet buffer size: 6 MB
Mounting
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware
included); horizontal surface mounting only Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware
included); horizontal surface mounting only
Performance
1000 Mb Latency
< 2.9 µs (FIFO) < 2.9 µs (FIFO)
10 Gbps Latency
< 1.3 µs (FIFO) < 1.3 µs (FIFO)
Throughput
up to 95 million pps up to 131 million pps
Switching capacity
128 Gbps 176 Gbps
Routing table size
2,000 entries 2,000 entries
MAC address table size
16,000 entries 16,000 entries
Environment
Operating temperature
32ºF to 131ºF (0ºC to 55ºC) 32ºF to 131ºF (0ºC to 55ºC)
Operating relative humidity
15% to 95% @ 104ºF (40ºC), non-condensing 15% to 95% @ 104ºF (40ºC), non-condensing
Non-operating/Storage temperature
-40ºF to 158ºF (-40ºC to 70ºC) -40ºF to 158ºF (-40ºC to 70ºC)
Non-operating/Storage relative humidity
15% to 95% @ 149ºF (65ºC), non-condensing 15% to 95% @ 149ºF (65ºC), non-condensing
Altitude
up to 10,000 ft. (3 km) up to 10,000 ft. (3 km)
Acoustic
Power: 51.5 dB, Pressure: 38.1 dB; DIN 45635T.19 per ISO 7779 Power: 51.5 dB, Pressure: 38.1 dB; DIN 45635T.19 per ISO 7779
Electrical characteristics
Description
The switch automatically adjusts to any voltage between 100-127 and 200-240
volts and either 50 or 60 Hz The switch automatically adjusts to any voltage between 100-127 and 200-240
volts and either 50 or 60 Hz
Maximum heat dissipation
447 BTU/hr (472 kJ/hr), max. using PoE+ 667 BTU/hr (704 kJ/hr), max. using PoE+
Voltage
100-127 / 200-240 VAC 100-127 / 200-240 VAC
Current
6.1 / 3.1 A 6.4 / 3.2 A
Idle power
65 W 89 W
Power consumption
490 W 556 W
Frequency
50 / 60 Hz 50 / 60 Hz
Notes
Idle power is the power consumption of the base system with no traffic.
Maximum power rating and maximum heat dissipation are the worst-case
theoretical maximum numbers provided for planning the infrastructure with fully
loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules
populated. Idle power is the power consumption of the base system with no traffic.
Maximum power rating and maximum heat dissipation are the worst-case
theoretical maximum numbers provided for planning the infrastructure with fully
loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules
populated.
Safety
EN 60950/IEC 60950; CAN/CSA 22.2 No. 60950; EN 60825; UL 60950 EN 60950/IEC 60950; CAN/CSA 22.2 No. 60950; EN 60825; UL 60950
Emissions
FCC part 15 Class A; EN 55022/CISPR-22 Class A; VCCI Class A FCC part 15 Class A; EN 55022/CISPR-22 Class A; VCCI Class A
Immunity
EN
EN 55024, CISPR 24 EN 55024, CISPR 24
ESD
IEC 61000-4-2; 4 kV CD, 8 kV AD IEC 61000-4-2; 4 kV CD, 8 kV AD
Radiated
IEC 61000-4-3; 3 V/m IEC 61000-4-3; 3 V/m
EFT/Burst
IEC 61000-4-4; 1.0 kV (power line), 0.5 kV (signal line) IEC 61000-4-4; 1.0 kV (power line), 0.5 kV (signal line)
Surge
IEC 61000-4-5; 1 kV / 2 kV AC, 1 kV signal, 0.5 kV DC IEC 61000-4-5; 1 kV / 2 kV AC, 1 kV signal, 0.5 kV DC
Conducted
IEC 61000-4-6; 3 V IEC 61000-4-6; 3 V
Power frequency magnetic field
IEC 61000-4-8; 1 A/m IEC 61000-4-8; 1 A/m
Voltage dips and interruptions
IEC 61000-4-11; > 95% reductions, 0.5 period; 30% reduction, 25 periods IEC 61000-4-11; > 95% reductions, 0.5 period; 30% reduction, 25 periods
Harmonics
IEC 61000-3-2 IEC 61000-3-2
Flicker
IEC 61000-3-3 IEC 61000-3-3
Management
HP ProCurve Manager Plus; HP ProCurve Manager; command-line interface;
Web browser; out-of-band management (serial RS-232C) HP ProCurve Manager Plus; HP ProCurve Manager; command-line interface;
Web browser; out-of-band management (serial RS-232C)