HP ProBook x360 435 G7 Maintenance And Service Manual Download

Page: 46 / 92

Remove the Phillips M2.0 × 2.5 screw (2), and then remove the WLAN module (3).

NOTE:

Models have either one or two WLAN antennas. On models with two antennas, the #1 white

WLAN antenna cable connects to the WLAN module #1 Main terminal. The #2 black WLAN antenna cable
connects to the WLAN module #1 Aux terminal.

If the WLAN antenna is not connected to the terminal on the WLAN module, you must install a protective
sleeve on the antenna connector, as shown in the following illustration.

Reverse this procedure to install the WLAN module.

RTC battery

To remove the RTC battery, use this procedure and illustration.

Chapter 5 Removal and replacement procedures for authorized service provider parts

Summary of Contents for ProBook x360 435 G7





























































































Search results

Summary of Contents for ProBook x360 435 G7

Reviews:

Related manuals for ProBook x360 435 G7

Brands by name

Popular brands

HP ProBook x360 435 G7, Maintenance And Service Manual

Search results

Summary of Contents for ProBook x360 435 G7

Reviews:

Related manuals for ProBook x360 435 G7

Brands by name

Popular brands