manualshive.com logo in svg

HP ProBook 635 Aero G7, Maintenance And Service Manual, Page: 101 / 119

Share
Download
HP ProBook 635 Aero G7 Maintenance And Service Manual Download Page 101

Table 10-3

Solid-state drive specifications (continued)

256 GB*

512 GB*

1 TB*

Random write

Up to 100,000 IOPs

Up to 100,000 IOPs

Up to 100,000 IOPs

Total logical sectors

468,883,296

1,000,215,216

1,500,336,388

Operating temperature

0°C to 70°C (32°F to 158°F)

*1 GB = 1 billion bytes when referring to hard drive storage capacity. Actual accessible capacity is less. Actual drive specifications can differ

 

slightly.

NOTE:

Certain restrictions and exclusions apply. Contact support for details.

Solid-state drive specifications (SATA-3)

This section provides specifications for your solid-state drive.

Table 10-4

Solid-state drive specifications

128 GB*

Dimensions

Height

1.35 mm

Weight

< 10 g

Interface type

SATA-3

Ready time, maximum (to not busy)

1.0 ms

Access times, logical

0.1 ms

Transfer rate

up to 540 MB/s

Total logical sectors

234,441,648

Operating temperature

0°C to 70°C (32°F to 158°F)

*1 GB = 1 billion bytes when referring to hard drive storage capacity. Actual accessible capacity is less. Actual drive specifications can differ

 

slightly.

NOTE:

Certain restrictions and exclusions apply. Contact support for details.

Solid-state drive specifications (SATA-3)

93

Summary of Contents for ProBook 635 Aero G7
























































































































Reviews:

No comments