Optical drive
Description
Spare part number
Blu-ray Disc R/RW with SuperMulti Drive
907607-001
DVD+/-RW Double-Layer SuperMulti Drive
907609-001
DVD-ROM Drive
907608-001
Optical drive bracket
NOTE:
The optical drive bracket is included in the Plastics Kit.
906001-001
Before removing the optical drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Place the computer in “Battery Safe mode” (
).
3.
Disconnect all external devices connected to the computer.
4.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
5.
Remove the service door (see
).
Remove the optical drive:
1.
Remove the Phillips PM2.5×3.0 screw (1) that secures the optical drive to the computer.
2.
Insert a tool into the release slot and push the optical drive to disengage it (2).
3.
Remove the optical drive from the computer (3).
32
Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
