Service door
Description
Spare part number
Service door
NOTE:
The service door is included in the Hard Drive Hardware Kit.
906002-001
Before removing the service door, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Place the computer in “Battery Safe mode” (
3.
Disconnect all external devices connected to the computer.
4.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
Remove the service door:
1.
Loosen the captive Phillips screw (1).
2.
Lift the bottom of the door upward (2), and then remove the door from the computer (3).
Reverse these procedures to install the service door.
Component replacement procedures
31
