background image

Personal grounding methods and equipment .................................................................................. 28
Grounding the work area ................................................................................................................... 28
Recommended materials and equipment ........................................................................................  28

Packaging and transporting guidelines ..............................................................................................................  29

5  Removal and replacement procedures for authorized service provider parts .................................................... 30

Component replacement procedures .................................................................................................................. 30

Preparation for disassembly ............................................................................................................. 30
Bottom cover .....................................................................................................................................  30
Battery ............................................................................................................................................... 31
Memory modules ............................................................................................................................... 33
WLAN module ....................................................................................................................................  34
WWAN module ................................................................................................................................... 36
Solid-state drive ................................................................................................................................ 38
RTC battery ........................................................................................................................................ 39
I/O board ............................................................................................................................................ 39
Touchpad ...........................................................................................................................................  40
Fan .....................................................................................................................................................  41
Fingerprint reader board ................................................................................................................... 42
Heat sink ............................................................................................................................................ 43
System board ....................................................................................................................................  45
Speakers ............................................................................................................................................  48
Power connector cable ...................................................................................................................... 49
Display assembly ............................................................................................................................... 50
Top cover with keyboard ...................................................................................................................  57

6  Computer Setup (BIOS), TPM, and HP Sure Start .............................................................................................  59

Using Computer Setup ......................................................................................................................................... 59

Navigating and selecting in Computer Setup ...................................................................................  59
Restoring factory settings in Computer Setup .................................................................................  59
Updating the BIOS .............................................................................................................................  60

Determining the BIOS version ......................................................................................... 60
Preparing for a BIOS update ...........................................................................................  60

Downloading a BIOS update .........................................................................  60
Installing a BIOS update ...............................................................................  61

Changing the boot order using the f9 prompt .................................................................................. 61

TPM BIOS settings (select products only) ...........................................................................................................  61
Using HP Sure Start (select products only) .........................................................................................................  62

vi

Summary of Contents for ProBook 450 G8
































































































Reviews: