HP ProBook 4320s Maintenance And Service Manual Download Page 123

Page: 123 / 176

Select

To do this

Built-in device options

●

Enable/disable the wireless switch state.

●

Enable/disable embedded WLAN device radio.

●

Enable/disable Network Interface Controller (NIC).

●

Enable/disable LAN/WLAN Switching (disabled by
default).

●

Set the wake on LAN state.

◦

Disabled

◦

Boot to Network

◦

Follow Boot Order

●

Enable/disable the integrated camera (webcam).

●

Enable/disable Power Monitor Circuit.

●

Enable/disable the audio device.

●

Enable/disable the microphone.

●

Enable/disable the internal speakers.

Port options

Enable/disable USB port.

Set Security Level

Change, view, or hide security levels for all BIOS menu
items.

Restore Security Defaults

Restore the default security settings.

Computer Setup in Windows 7 115

Summary of Contents for ProBook 4320s

















































































































































































Search results

Summary of Contents for ProBook 4320s

Reviews:

Related manuals for ProBook 4320s

Brands by name

Popular brands

HP ProBook 4320s, Maintenance And Service Manual

Search results

Summary of Contents for ProBook 4320s

Reviews:

Related manuals for ProBook 4320s

Brands by name

Popular brands