2.
When a sheet falls into the tray, it should hit the stopper gently, to avoid paper damage and future paper
jams during the scan session. If a sheet does not lie flat on the tray, the angle of the tray should be
decreased, increasing the height of the end of the tray.
3.
To avoid paper jams, ensure that the scanned sheet falls on top of the previous scanned sheets.
TIP:
Increase the scanner’s prescan length to 25 cm.
TIP:
The recommended angle at which to start a batch scan is between 6° and 10°.
TIP:
If the paper tends to curl, you are recommended to scan with the curled edges in the direction of the scan,
to reduce the risk of paper jams.
8
Chapter 4 Tray angle adjustment
ENWW
Summary of Contents for Pro Scanner Output Tray
Page 1: ...HP Pro Scanner Output Tray User Guide ...
Page 4: ...iv ENWW ...
