HP Pro 3005 - Microtower PC Disassembly Instructions Manual Download Page 6

Page: 6 / 6

EL-MF877-00 Page 6
Template Revision B

PSG instructions for this template are available at

EL-MF877-01

Figure 13 : Electrolytic Capacitors location

Figure 14 : Heat the solder of Electrolytic Capacitors

Figure 15 : Remove the Electrolytic Capacitors

Figure 16 : Type 1 battery holder

Figure 17 : Type 2 battery holder

Figure 18 : Type 3 battery holder

Summary of Contents for Pro 3005 - Microtower PC

Page 4: ... template are available at EL MF877 01 Figure 1 Remove the two screws Figure 2 Remove the access panel Figure 3 Remove the front bezel Figure 4 Remove 4 screws then take heat sink Figure 5 Remove the system board Figure 6 Power supply screw locations on the chassis ...

Page 5: ...igure 7 Power supply cover screw locations on the left side Figure 8 Power supply cover screw locations on the right side Figure 9 Cut the plastic cable clamp Figure 10 Remove the fan and AC Inlet screws Figure 11 Power supply PCA and AC Inlet screw location Figure 12 Cut all cables connected to the board ...

Page 6: ...late are available at EL MF877 01 Figure 13 Electrolytic Capacitors location Figure 14 Heat the solder of Electrolytic Capacitors Figure 15 Remove the Electrolytic Capacitors Figure 16 Type 1 battery holder Figure 17 Type 2 battery holder Figure 18 Type 3 battery holder ...