HP PRINTER SERIES D2600 User Manual Download Page 30 | Manualshive

Page: 30 / 76

background image

Racking the disk enclosure

The disk enclosure can be installed into most standard server racks. To verify that your rack is supported
for use with the disk enclosure, see the QuickSpecs for the disk enclosure, available on the D2000
website:

http://www.hp.com/go/D2000

CAUTION:

Install disk drives in the enclosures only after mounting the enclosures in the rack.

•

A disk enclosure populated with disk drives is too heavy to lift safely.

•

Movement of a disk enclosure during installation might damage the internal storage media of in-
stalled disk drives.

Rack installation best practices

In addition to industry-standard recommendations, consider the following:

•

Locate the heaviest items, such as uninterruptable power supplies (UPS) and additional disk enclos-
ures near the bottom of the rack.

•

To make cabling easy, install the disk enclosures below the server.

•

Install similar components next to each other in the rack. Because disk enclosures, switches, and
servers are of differing depths, if you have more than one of a device, mount those devices adjacent
to one another to accommodate working behind the rack.

WARNING!

To reduce the risk of personal injury or damage to the equipment, be sure that:

•

At least two people lift the storage system during removal or installation if the weight exceeds
22.7 kg (50 lb). If the system is being loaded into the rack above chest level, a third person MUST
assist with aligning the system with the rails while the other two people support the weight of the
system.

•

The leveling jacks on the rack are extended to the floor.

•

The full weight of the rack rests on the leveling jacks.

•

The stabilizing feet are attached to the rack if it is a single-rack installation.

•

The racks are coupled together in multiple-rack installations.

•

Only one component in a rack is extended at a time. A rack might become unstable if more than
one component is extended.

•

To prevent damage and to ease insertion of the device into the rack, support the weight of the
device and keep it level when sliding it into the rack.

Installation

30

«
...
28
29
30
31
32
...
»

Summary of Contents for PRINTER SERIES D2600













































































Reviews:

No comments

Related manuals for PRINTER SERIES D2600

Brand: Raijintek Pages: 2

Brand: Tekram Technology Pages: 15

Brand: Bartec Pages: 17

Quickstore Portable

Brand: Sharkoon Pages: 9

Brand: KOLINK Pages: 2

Parasource PS10P

Brand: YORKVILLE Pages: 106

Brand: Vivotek Pages: 6

Brand: Pulsar Pages: 4

SL3650-LB2 SafeTANK

Brand: Raidon Pages: 25

ThunderForm HONDA CIVIC

Brand: MTX Pages: 4

Brand: STIEBEL ELTRON Pages: 20

KL546-TOSHIBA02

Brand: peerless-AV Pages: 5

MTL CROUSE-HINDS Series

Brand: Eaton Pages: 28

Brand: Laser Pages: 2

MIC-3038 Series

Brand: Advantech Pages: 2

Brand: Naficon Pages: 10

Weathersafe WPM02 Minibox

Brand: Time Guard Pages: 2

Brand: SilverStone Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands