HP PL4260N - 42" Plasma TV, Service Manual

Page: 166 / 245

(2) In case of IC damage, corresponding IC inside of TCP,
pictures by IC unit inside of TCP will not appear or Mis -
discharge. In most cases, the burnt mark can be seen
when IC failure occurs.
O
Test Point : Enlarge after measuring output of GND ~ TCP
O
Wave format : Output wave doesn’t come out
3-5. Crystal(CTRL B/D : X1) Damage
(1) When Crystal is damage, the screen doesn’t be shown.
O
Test Point : Enlarge after Measuring
3pin of GND ~ Crystal(CTRL B/D: X1)
O
Wave format : Output wave doesn’t come out
(2) In case of unusual launch of the Crystal, it may blink the
screen.
O
Test Point : Enlarge after Measuring
3pin of GND ~ Crystal(CTRL B/D: X1)
O
Wave format : As shown fig. 10
<Fig. 10 When Crystal is poor>
<Fig. 9 Crystal Normal Output Wave >
<Fig. 8 TCP Normal Output Wave >