HP Pavillion DV8 Maintenance And Service Manual Download Page 73

Page: 73 / 148

Removal and replacement procedures

Maintenance and Service Guide

4–39

13. If it is necessary to replace the display inverter:

a. Release the display inverter

as far from the display bezel as the backlight cables and display panel

cable allow.

b. Disconnect the two backlight cables

and the display panel cable

from the display inverter, and remove

the display inverter. The display inverter is available using spare part number 498324-001.

14. If it is necessary to replace the display hinges:

a. Remove the two Phillips PM2.0×4.0 screws

that secure the display hinge bracket to the display bezel.

b. Remove the display hinge bracket

Summary of Contents for Pavillion DV8





















































































































































Search results

Summary of Contents for Pavillion DV8

Reviews:

Related manuals for Pavillion DV8

Brands by name

Popular brands

HP Pavillion DV8, Maintenance And Service Manual

Search results

Summary of Contents for Pavillion DV8

Reviews:

Related manuals for Pavillion DV8

Brands by name

Popular brands