Display panel
NOTE:
The display panel spare part number includes the TouchScreen board but does not include the
display panel cable. The display panel cable is available using spare part number 856009–001.
Description
Spare part number
13.3–in, (1920x1080), FHD, UWVA/IPS, white light-emitting diode (WLED), 16:9 ultra wide aspect ratio,
AntiGlare, ultra-slim-bent (2.85mm), TouchScreen, Multi-Touch enabled, eDP)
856019–001
13.3–in, (1366x768), HD, UWVA/IPS, white light-emitting diode (WLED), 16:9 ultra wide aspect ratio,
AntiGlare, ultra-slim-bent (2.85mm), TouchScreen, Multi-Touch enabled, eDP)
856018–001
IMPORTANT:
Make special note of each screw and screw lock size and location during removal
and replacement
Before removing the display panel, follow these steps:
1.
Shut down the computer.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the keyboard top cover (see
), and then remove the following
components:
a.
Battery (see
).
b.
USB port shield (see
c.
).
Remove the display panel from the base enclosure:
1.
Remove the five Phillips 2.5×4.2 screws from the hinges (1).
CAUTION:
Ensure that the panel is laid flat and fully open from the base enclosure to prevent tipping
and possible damage to the unit.
2.
Slide the display panel forward to release hinges from base enclosure (2).
60
Chapter 5 Removal and replacement procedures for authorized service provider parts
Summary of Contents for Pavilion x360 m3-u000
Page 4: ...iv Safety warning notice ...
Page 8: ...viii ...
