Docking port board
NOTE:
The microphone spare part kit includes the cable.
Description
Spare part number
Docking port board (includes cable)
784418-001
Before removing the docking port board, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and
then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the back cover (see
Back cover on page 19
).
Remove the docking port board:
1.
Detach the docking port board cable (1) from the back cover. (The docking port board cable is attached
to the back cover with double-sided adhesive.)
2.
Remove the two Phillips PM1.9×3.3 screws (2) that secure the docking port board to the back cover.
3.
Remove the docking port board (3) and cable.
Reverse this procedure to install the docking port board.
Docking port board
21
Summary of Contents for Pavilion x2 10-k0XX
Page 4: ...iv Safety warning notice ...