4.
Remove the two Phillips M2.5×5.7 screws (2) and the three Phillips M2.0×5.7 screws (3) that secure
the bottom cover to the computer.
5.
Remove the four Phillips M2.0×5.7 screws that secure the bottom cover to the computer.
6.
Insert a case utility tool (1) or similar plastic, flat-edged tool between the bottom cover
and the computer.
7.
Release the bottom cover front edge (2) and swing it up and back until it releases.
8.
Remove the bottom cover (3).
Reverse this procedure to install the bottom cover.
Component replacement procedures
25
Summary of Contents for pavilion Series
Page 4: ...iv Safety warning notice ...
Page 7: ...11 Recycling 64 Index 65 vii ...
Page 8: ...viii ...
Page 21: ...Computer major components Computer major components 13 ...
