background image

website. Go to 

http://www.hp.com/support

, select your country or region, and follow the on-screen 

instructions.

IMPORTANT:

HP Recovery Manager does not automatically provide backups of your personal data. Before 

beginning recovery, back up any personal data you want to retain.

Using HP Recovery media, you can choose from one of the following recovery options:

NOTE:

Only the options available for your computer display when you start the recovery process.

System Recovery—Reinstalls the original operating system, and then configures the settings for the 
programs that were installed at the factory.

Factory Reset—Restores the computer to its original factory state by deleting all information from the 
hard drive and re-creating the partitions. Then it reinstalls the operating system and the software that 
was installed at the factory.

The HP Recovery partition (select products only) allows System Recovery only.

Using the HP Recovery partition (select products only)

The HP Recovery partition allows you to perform a system recovery without the need for recovery discs or a 
recovery USB flash drive. This type of recovery can be used only if the hard drive is still working.

To start HP Recovery Manager from the HP Recovery partition:

IMPORTANT:

For a tablet with a detachable keyboard, connect the tablet to the keyboard base before 

beginning these steps (select products only).

1.

Type 

recovery

 in the taskbar search box, select Recovery Manager, and then select HP Recovery 

Environment.

 or –

For computers or tablets with keyboards attached, press 

f11

 while the computer boots, or press and 

hold 

f11

 as you press the power button.

For tablets without keyboards:

Turn on or restart the tablet, and then quickly hold down the volume up button; then select f11.

 or –

Turn on or restart the tablet, and then quickly hold down the volume down button; then select f11.

2.

Select Troubleshoot from the boot options menu.

3.

Select Recovery Manager, and then follow the on-screen instructions.

Using HP Recovery media to recover

You can use HP Recovery media to recover the original system. This method can be used if your system does 
not have an HP Recovery partition or if the hard drive is not working properly.

1.

If possible, back up all personal files.

2.

Insert the HP Recovery media, and then restart the computer.

NOTE:

If the computer does not automatically restart in HP Recovery Manager, change the computer 

boot order. See 

Changing the computer boot order on page 83

.

3.

Follow the on-screen instructions.

82

Chapter 8   Backing up, restoring, and recovering

Summary of Contents for PAVILION Gaming 17-ak000













































































































Reviews: