manualshive.com logo in svg

HP Pavilion g6-2200, Maintenance And Service Manual, Page: 52 / 124

Share
Download
HP Pavilion g6-2200 Maintenance And Service Manual Download Page 52

5.

Insert a straightened paper clip 

(1)

 into the release access opening in the bezel.

6.

Press the release tab 

(2)

 and remove the bezel from the tab side 

(3)

.

7.

Remove the bezel 

(4)

 from the optical drive.

Reverse this procedure to reassemble and install the optical drive.

Hard drive

NOTE:

The hard drive spare part kit does not include the hard drive cable, hard drive bumpers, or

hard drive bracket and screws.

Description

Spare part number

Supports the following 

9.50 mm

, 

6.35 cm

 (2.50 in) SATA hard drives:

 

1 TB, 5400 rpm

676521-001

750 GB, 7200 rpm

633252-001

750 GB, 5400 rpm

634250-001

640 GB, 5400 rpm

669300-001

500 GB, 7200 rpm

634925-001

500 GB, 5400 rpm

669299-001

320 GB, 5400 rpm

622643-001

Supports the following 

7.00 mm

, 

6.35 cm

 (2.50 in) SATA hard drives:

 

320 GB, 5400 rpm

645193-001

Hard drive hardware kit (includes hard drive cable, hard drive bumpers, and hard drive bracket and
screws)

682745-001

44

Chapter 4   Removal and replacement procedures

ENWW

Summary of Contents for Pavilion g6-2200





























































































































Reviews:

No comments