Replacing or upgrading the hard drive
CAUTION:
To prevent information loss or an unresponsive system:
Shut down the computer before removing the hard drive from the hard drive bay. Do not remove the
hard drive while the computer is on, in the Sleep state, or in Hibernation.
If you are not sure whether the computer is off or in Hibernation, turn the computer on by pressing the
power button. Then shut down the computer through the operating system.
Removing the hard drive
To remove the hard drive, follow these steps:
1.
Save your work, shut down the computer, and close the display.
2.
Disconnect all external devices that are connected to the computer.
3.
Unplug the power cord from the AC outlet.
4.
Turn the computer upside down on a flat surface.
5.
Remove the battery from the computer.
6.
Loosen the service cover screws
(1)
.
7.
Lift the service cover
(2)
away from the computer, and then remove it.
Replacing or upgrading the hard drive
27
Summary of Contents for Pavilion g6-1000
