background image

1

Setting power options

Using power-saving states

The computer has two power-saving states enabled at the factory: Sleep and Hibernation.

When Sleep is initiated, the power lights blink and the screen clears. Your work is saved to memory,
letting you exit Sleep faster than exiting Hibernation. If the computer is in the Sleep state for an extended
period or if the battery reaches a critical battery level while in the Sleep state, the computer initiates
Hibernation.

When Hibernation is initiated, your work is saved to a hibernation file on the hard drive and the computer
turns off.

CAUTION:

To prevent possible audio and video degradation, loss of audio or video playback

functionality, or loss of information, do not initiate Sleep or Hibernation while reading from or writing to
a disc or an external media card.

NOTE:

You cannot initiate any type of networking connection or perform any computer functions while

the computer is in the Sleep state or in Hibernation.

Initiating and exiting Sleep

The system is set at the factory to initiate Sleep after 10 minutes of inactivity when running on battery
power and 25 minutes of inactivity when running on external power.

Power settings and timeouts can be changed using Power Options in Windows® Control Panel.

With the computer on, you can initiate Sleep in any of the following ways:

Close the display.

Click 

Start

, and then click the 

Power

 button.

Click 

Start

, click the arrow next to the Lock button, and then click 

Sleep

.

You can exit Sleep in any of the following ways:

Press the power button.

If the display is closed, open the display.

Press a key on the keyboard.

Activate the TouchPad.

When the computer exits Sleep, the power lights turn on and your work returns to the screen where you
stopped working.

Using power-saving states

1

Summary of Contents for Pavilion dv3000 - Entertainment Notebook PC


































Reviews: