Manual Version: 6P101-20120928
BOM: 3104A0C3
Part number: 5998-3449
countersunk-head screws to secure the opacity shield to the rear of the
chassis.
Figure 4
Installing the rear opacity shield
Installing the FIPS enclosure to the A8808-V
1.
Loosen the captive screws on the two sides of the ventilation panel at
the rear of the chassis and remove the ventilation panel.
2.
Position the rear opacity shield where the ventilation panel was
installed, and fasten the captive screws.
Figure 5
Installing the rear opacity shield
(1) Ventilation panel
(2) Rear-side opacity shield
3.
Loosen the captive screws on the two sides of the ventilation panel in
the front of the chassis and remove the ventilation panel.
4.
Position the front opacity shield where the ventilation panel was
installed, and fasten the captive screws.
1
2
8