background image

10

HP Pavilion home PC

Filename: 5219urf 2+ users guide US_            Title: hp pavilion home pc
Template: normal.dot            Author: pamela            Last Saved By: Authur
Revision #: 5      Page: 10 of 12      Printed: 02/26/04 10:47 AM

FCC GUIDELINES

This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:

Œ

 

Reorient or relocate the receiving antenna

Œ

 

Increase the separation between the equipment and receiver

Œ

 

Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.

Œ

 

Consult the dealer or an experienced radio/TV technician
for help.

The Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulation.
Cet appareil numerique de la class B respecte toutes les exigences du
Règlement sur le materiel brouilleur du Canada.

Caution:

Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate
this equipment.    Shielded interface cable, if any, must be used in

order to comply with emission limits.

This device complies with Part 15 of the FCC Rules. Operation is
subjection to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.

Summary of Contents for Pavilion 5219URF 2+













Reviews: