EL-MF877-00 Page 2
Template Revision B
PSG instructions for this template are available at
EL-MF877-01
Components, parts and materials containing
refractory ceramic fibers
Components, parts and materials containing
radioactive substances
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components
and materials requiring selective treatment can be removed.
Tool Description
Tool Size (if
applicable)
Screw driver
#0
Description #2
Description #3
Description #4
Description #5
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:
1. Remove screw from D base x 7pcs
2. Release screw from D base center x 2pcs
3. Remove C top sub-Assy. from unit
4. Dis-connect Battery cable ,K/B membrane, TP FFC, Camera FFC connector from M/B
5. Remove TP FFC from TP module
6. Remove screw M2L2.5 x 3 on TP support bracket
7. Remove TP support bracket from C top sub-Assy.
8. Remove screw M2L2 x 3 on TP holder bracket
9. Remove TP holder bracket & TP module & TP mylar from C top sub-Assy.
10. Remove power FFC from D/B Pow.
11. Remove screw M2L3.5 x 2 on D/B Pow.
12. Remove D/B Pow. from D base sub-Assy.
13. Dis-connect speaker connector from M/B
14. Remove screw M2L3.5 x 3 on speaker box L / R
15. Remove speaker from unit
16. Dis-connect battery pack connector from M/B
17. Remove screw M2L3.5 x2 on battery pack
18. Remove screw M2L3.5 x1 on battery pack
19. Remove battery pack from unit
20. Dis-connect D/B & POWER/B FFC connectors from D/B & M/B
21. Remove D/B & POWER/B FFC
22. Remove screw M2L3.5 x 1 on D/B
23. Remove D/B from unit
24. Dis-connect LCD cable connector from M/B
25. Remove WLAN antenna cable from WLAN module
26. Remove screw M2L2 x 1 on WLAN module
27. Remove WLAN module from unit
28. Remove screw M2L3 x 5 on M/B
29. Remove M/B from unit
30. Remove screw M2L2 x 2 on thermal plate
31. Remove thermal plate from M/B
32. Remove antenna cable & LCD cable from unit
33. Remove screw L2.5L4.5 x 4 on hinge L / R bracket
34. Remove LCD sub-Assy. from unit
35. Remove glass with bezel from LCD sub-Assy.
