HP P4522A - Traffic Management Server Sa8220, User Manual

Page: 173 / 352

C H A P T E R 5 Routing Commands
161
config route ospf-dead Changes the duration of the OSPF router dead interval. The router
dead interval is the number of seconds the SA8220’s OSPF
neighbors should wait before assuming that this OSPF SA8220 is
down. This must match the router dead interval of the ingress
router. Valid range is from 1 to 2,147,483,647, and the default is
40.
This value must be at least four times the hello interval.
config route ospf-dead <nseconds>
where
nseconds
is the number of seconds in the OSPF router
dead interval.
config route ospf-
authtype
NOTE: An OSPF Area can
have only one OSPF
authentication scheme.
Select
none
to specify no
OSPF authentication, or
simple
to specify simple
password authentication. If
you select
simple
, you
must provide an
authentication key: a string
of from one to eight
characters (double quotes
and spaces excluded). The
default is
none
. Both sides
of the OSPF connection
must use the same
authentication type and key.
Specifies the OSPF authentication mode. Router Authentication
type and key are security mechanisms to guarantee that routing
information is exchanged only with trusted routers. The type and
key together comprise the "authentication scheme."
config route ospf-authtype [none | simple
ospf-authkey <simplekey> | md5 ospf-authkey
<md5key> keyid <id>
where:
•
none
disables OSPF Authentication
•
simple
enables OSPF Authentication (requiring you to
provide an authentication key)
•
simplekey
is a string of from one to eight characters used as
an authentication password. Spaces and double quotes are not
permitted. This string must match the SA8220's OSPF
neighbors.
•
md5key
is a string of from one to sixteen characters. Spaces
and double quotes are not permitted.
•
id
is an integer between 1 and 255.
Command Description