HP OmniBook Series, Setup Manual

Page: 66 / 78

Solving Problems with Your Computer
Recovering and Reinstalling Software
66 Setup Guide
Recovering and Reinstalling Software
You can use the Recovery CD to recover an original OmniBook build, or you can use it
to install the HP custom software over a user-installed alternate operating system. If you
need to recover a specific application, you can reinstall the software directly from your
hard drive; for instructions, see “To recover an application” in the electronic User’s
Guide.
The Recovery CD provides the OmniBook–specific Windows drivers to configure your
custom system. You can find drivers:
•
On the OmniBook hard drive under C:\Omnibook\Drivers.
•
On the Recovery CD, under \Omnibook\Drivers\W98.
•
On the OmniBook Web site at www.hp.com/omnibook. This Web site contains the
latest updates of software drivers for your computer.
To recover the factory installation of your hard disk
The following procedure describes how to recover the original Windows software and
operating system that came with your computer.
CAUTION
This procedure will format the hard disk drive. After the hard disk drive is
formatted, you’ll need to reinstall any applications. Reformatting the hard disk
drive will erase all data on the disk.
1. Back up all data from your hard disk.
2. Connect the AC adapter to the computer.
3. Insert the bootable Recovery CD in the CD-ROM drive.
4. Reboot and, when you see the HP logo, press F2.
5. Select the CD-ROM drive as the first boot device, exit from the BIOS Setup utility,
and reboot.
You can find more details about recovering the factory installation of Windows on the
Recovery CD: the file readme.txt is in the CD’s root directory.
The recovery process can take as long as 30 minutes. Do not interrupt the process or
unplug the AC adapter until the process is completed.