manualshive.com logo in svg

HP OmniBook 3100, Service Manual, Page: 98 / 107

Share
Download
HP OmniBook 3100 Service Manual Download Page 98

HP OmniBook 2100/3000/3100

Reference Information

5-3

 

Table 5-1. OmniBook 2100/3000/3100 LCD Guidelines (TFT)

Type of Imperfection

Imperfections Not Allowed

NEC 13" TFT, XGA

Electrical Imperfections:

Bright dots 

(a)

Dark dots 

(a)

 • 

13 or more single bright dots.

 • 

3 or more double bright dots.

 • 

8 or more single or double dark dots.

 • 

3 or more single/double bright dots within 7 mm.

 • 

Any occurrence of triple bright dots (or triple dark dots).

Mechanical Imperfections:

Spots 

(b)

Lines 

(c)

Polarizer scratches 

(d)

Polarizer dents, bubbles 

(e)

 • 

4 or more spots 0.3-0.5 mm avg. dia.

 • 

5 or more lines 0.7-1 mm long and over 0.05 mm wide.

 • 

3 or more dents or bubbles 0-0.5 mm avg. dia.

 • 

Any spot over 0.5 mm avg. dia.

 • 

Any line over 1 mm long or 0.1 mm wide.

 • 

Any scratch noticeable from 30 cm (12 in) under normal office lighting.

 • 

Any dent or bubble over 0.5 mm avg. dia.

Samsung 12" TFT, SVGA

Electrical Imperfections:

Bright dots 

(a)

Dark dots 

(a)

 • 

5 or more single bright dots.

 • 

11 or more single dark dots.

 • 

5 or more double or triple dark dots.

 • 

15 or more total bright or dark dot imperfections.

 • 

Any occurrence of 2 bright dots within 15 mm.

 • 

Any occurrence of 2 single/double/triple dark dots within 5 mm.

Mechanical Imperfections:

Spots 

(b)

Lines 

(c)

Polarizer scratches 

(d)

Polarizer dents, bubbles 

(e)

 • 

5 or more spots 0.1-0.8 mm avg. dia.

 • 

5 or more lines 0.3-1 mm long and over 0.01 mm wide.

 • 

4 or more scratches 0.3-10 mm long and over 0.01 mm wide.

 • 

7 or more dents or bubbles 0-0.5 mm avg. dia.

 • 

Any spot over 0.8 mm avg. dia.

 • 

Any line over 1 mm long or 0.8 mm wide.

 • 

Any scratch over 10 mm long or 0.1 mm wide.

 • 

Any dent or bubble over 0.5 mm avg. dia.

Definitions of imperfections:

a

Bright or dark dot: A subpixel (red, green, or blue dot) that is stuck on or off.

b

Spot: A point on the display that appears dark or bright and does not change in size. Caused by foreign
circular matter on the backlight.

c

Line: A line on the display that appears dark or light and does not change in size. Caused by
contamination (lint, hair) behind the display.

d

Polarizer scratch: A light line that is visible on a darker background and does not change in size.

e

Polarizer dent or bubble: A light spot with a darker border that appears on a lighted display and does not
change in size.

Summary of Contents for OmniBook 3100












































































































Reviews:

No comments