HP MSR SERIES, Configuration Manual, Page: 607 / 889

590
Figure 608 Configuring coding parameters of the call route
For coding parameters configuration items of the call route, see Table 227 .
Configuring other parameters for a call route
Select Voice Management > Call Route from the navigation tree, and then click the icon of the call
route to be configured to access the advanced settings configuration page.
Figure 609 Configuring other parameters of the call route
For the configuration items of other parameters of the call route, see Table 227 and Table 228 .
Table 228 Configuration items
Item Description
Call Route Selection Priority Set the priority of the call route. The smaller the value, the higher the priority.
The Local End Plays
Ringback Tone
•
Enable.
•
Disable.
By default, the remote end instead of the local end plays ringback tones.