HP MSR SERIES, Configuration Manual

Page: 413 / 889

396
Figure 399 Notes services
3. Click Add to enter the page for adding a Notes service.
Figure 400 Adding a Notes service resource
4. Configure the Notes service resource as described in Table 170 .
5. Click Apply .
Table 170 Configuration items
Item Description
Resource Name
Enter a name for the Notes service resource.
The resource name must be unique in the SSL VPN system. Resources are uniquely
identified by their names.
IMPORTANT:
If you do not configure the command for Command , HP recommends including the
resource type, local address, and local port in the resource name so that users can view
the desired information after they log in to the SSL VPN system.
Remote Host Enter the host name or IP address of the Notes mail server.
Remote Port Enter the service port number of the Notes mail server.
Local Host
Enter a loopback address or a character string that represents a loopback address.
IMPORTANT:
The local host character string must be the same as the mail server name in the Notes
application. Otherwise, the Notes service resource cannot be used normally.
Local Port Enter the local port number. It must be the default port number of the Notes service.
Command
Configure the command for the resource.
Users must manually start the Notes service application. You do not need to configure
this item.