HP MSR SERIES, Configuration Manual, Page: 389 / 889

372
Figure 369 Adding a local user
2. Enable L2TP:
a. Select VPN > L2TP > L2TP Config from the navigation tree.
The L2TP configuration page appears, as shown in Figure 370 .
b. Select the box before Enable L2TP .
c. Click Apply .
Figure 370 Enabling L2TP
3. Modify the PPP authentication method of the ISP domain system :
a. On the L2TP configuration page, click Add to enter the L2TP group configuration page.
b. Select CHAP as the PPP authentication method.
c. Select ISP domain system (the default ISP domain).
d. Click the Modify button of the ISP domain.
The ISP domain modification page appears, as shown in Figure 371 .
e. On the page, select the server type Local as the primary PPP authentication method.
f. Click Apply to return to the L2TP group configuration page.