HP MSR SERIES, Configuration Manual, Page: 381 / 889

364
Enabling L2TP
1. Select VPN > L2TP > L2TP Config from the navigation tree to enter the L2TP configuration page, as
shown in Figure 363 .
2. On the upper part of the page, select the box before Enable L2TP .
3. Click Apply .
Figure 363 L2TP configuration page
Adding an L2TP group
1. Select VPN > L2TP > L2TP Config from the navigation tree to enter the L2TP configuration page, as
shown in Figure 363 .
2. On the lower part of the page, click Add to add an L2TP group.
Figure 364 Adding an L2TP group