HP MSR SERIES, Configuration Manual, Page: 180 / 889

163
and then select the specific attack protection functions to be enabled. Then, click Apply to finish the
configuration.
Figure 161 Intrusion detection configuration page
On MSR20/30/50/93X/1000 routers
Select Security Setup > Attack Defend > Intrusion Detection to enter the page shown in Figure 162 . Click
Add to enter the page for adding a new intrusion detection policy, as shown in Figure 163 . Select an
interface and select the attack protection functions to be enabled, and then click Apply . The selected
attack protection functions will be enabled on the selected interface.
Figure 162 Intrusion detection policy list