For supported platforms and minimum software requirements to support this
product, see the document titled "Support for the HP BX Transceivers" on the
"HP Mini-GBICs and SFPs" Manuals Web page.
The J9143B connects to the J9142B "downstream" transceiver, or to any IEEE-
standard 1000BASE-BX10-D ("downstream") device. (A 1000-BX-U
transceiver can only connect to a 1000-BX-D product. You cannot connect two
1000-BX-U transceivers together.)
Power consumption is 1 watt maximum.
Services
Refer to the HP website at:
www.hp.com/networking/services
for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
HP 1-port Power Injector
(J9407B)
Physical characteristics
Dimensions
5.71(d) x 2.36(w) x 1.22(h) in. (14.5 x 6 x 3.1 cm)
Weight
1 lb. (0.45 kg)
Environment
Operating temperature
32°F to 104°F (0°C to 40°C)
Operating relative
humidity
5% to 93%, noncondensing
Nonoperating/Storage
temperature
-4°F to 158°F (-20°C to 70°C)
Nonoperating/Storage
relative humidity
5% to 95%, noncondensing
Altitude
up to 10,000 ft. (3 km)
Electrical characteristics Voltage
100-240 VAC
Current
0.3/0.2 A
Frequency
50/60 Hz
Notes
IEEE 802.3af compliant
Safety
UL 60950; EN 60950
Emissions
EN 55024; EN 55022 (CISPR 22) Class B with FTP Cabling; FCC Part 15, Class B
with FTP cabling
Notes
The 1-port power converter has 1 AC power cord input, 1 RJ-45 10/100/1000
Mbps port for data coming from the network infrastructure, and 1 RJ-45 for
data plus IEEE 802.3af-compliant PoE for Gigabit Ethernet to power the
access point.
Services
Refer to the HP website at:
www.hp.com/networking/services
for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
QuickSpecs
HP MSM Controller Series
Accessory Product Details
DA - 13271 Worldwide — Version 18 — December 20, 2013
Page 26