User Manual
2
The battery will be charged only when the projector is not in use (Power off).
Connect one end of the supplied power adapter to DC IN jack and the other end to
a power outlet to start charging.
During charge, the LED indicator lights will flash intermittently. When the battery
is fully charged, the LED indicator lights appears solid blue.
•
Push the Power button for 2 seconds to turn on the projector.
•
Push the Power button again for 3 seconds to turn off the projector.
•
Standby mode: Push the Power button for 1 second to turn on / off the projector
light to save the battery and system reboot time. (The LEDs are still on when the
projector is in standby mode.)
The projector is built with an
embedded battery for mobile use.
Please charge the projector for 5
hours prior to its first use. Repeat
charging will take around 3 hours.
Charging the product
Charging LED Indicator
LED indicators
Power On / Off / Standby
Getting Started
3 blue LEDs stay on
Power capacity is between 60% to 100%
2 blue LEDs stay on
Power capacity is between 35% to 60%
1 blue LED stays on
Power capacity is between 10% to 35%
Power capacity is below 10%, LED will
blink for 10 secs then turn off.
LED Marquee
Projector is being charged
LED Status
Indication
1 blue LED blinks
EN