HP ML350 - ProLiant - G2, Maintenance And Service Manual

Page: 35 / 78

Removal and replacement procedures 35
6.
Remove the fan.
To replace the component, reverse the removal procedure.
Expansion slot cover
To remove the component:
1.
Do one of the following:
•
Unlock and remove the bezel (" Front bezel " on page 27 ).
•
Extend the server from the rack (on page 26 ).
2.
Remove the access panel (" Access panel " on page 29 ).
3.
Push the release latches on the expansion board retainer and open the retainer.