HP ML110 - ProLiant G5 2TB Storage Server NAS, User Manual, Page: 29 / 172

The Integrated Lights-Out port on the storage server can be configured through the Rapid Startup
Wizard or through the iLO 2 ROM-Based Setup Utility (RBSU). SNMP is enabled and the Insight
Management Agents are preinstalled.
The HP iLO 2 management processor provides multiple ways to configure, update, operate, and
manage servers remotely. The HP ProLiant Storage Server comes preconfigured with iLO 2 default
factory settings including a default user account and password. These settings can be found on the
iLO 2 Default Network Settings tag on the front of the server. If iLO 2 is connected to a network
running DNS and DHCP, you can use it immediately without changing any settings.
For more information on using HP iLO 2, see the HP Integrated Lights-Out 2 User Guide .
To quickly set up iLO 2 using the default settings for iLO 2 Standard and iLO 2 Advanced features on
ML350 G5, DL380 G5, and DL585 G2 Storage Servers, follow these steps:
1. Ensure that a network cable is connected to the iLO 2 port located on the back of the storage
server.
NOTE:
This connection method is easiest when the connection is to a DHCP and DNS supported
network.
2. If you are not using dynamic DHCP (IP addressing), you will need to input a static IP address by
using the direct attach method and the iLO 2 RBSU.
3. Using the methods described in the HP Integrated Lights–Out 2 User Guide , connect to the iLO
2 port.
NOTE:
To find the default iLO 2 log on settings, see the iLO 2 Default Network Settings card attached
to your server. The default DNS, administrator name, and password needed to log on will
be on this card.
4. If desired, you can change the default user name and password on the administrator account to
your predefined selections.
5. Set up your user accounts, if using the local accounts feature.
6. Activate iLO 2 advanced features by entering a license key from the included HP ProLiant Essentials
Integrated Lights-Out 2 Advanced Pack .
7. Access the HP ProLiant Storage Server using the iLO 2 Remote Console functionality. Log on to
the HP ProLiant Storage Server with the default user name
administrator
and the password
hpinvent
. The HP ProLiant Storage Server Management console starts automatically.
NOTE:
When the Remote Console feature is enabled, you can get access to the storage server's
login screen.
The Integrated Lights-Out 2 port comes with factory default settings, which the administrator can
change. Administrators may want to add users, change SNMP trap destinations, or change networking
settings. See the
HP Integrated Lights-Out 2 User Guide for information about changing these settings.
To obtain this guide, go to http://www.hp.com/support/manuals , navigate to the servers section,
HP ProLiant Storage Server 29