Synchronizing the Wireless Devices
The wireless devices in the kit are shipped pre-synchronized from the factory. You only need to
synchronize the devices if you replace either the keyboard, mouse, or USB receiver.
1.
Ensure that the computer is turned on, the batteries are installed in the keyboard and mouse, the
switch on the bottom of the mouse is in the On position, and the USB receiver is plugged into a
USB port on the computer.
2.
Press the connect button on the receiver for approximately five seconds. The status light on the
receiver will flash for a few seconds when the connect button is pressed.
3.
While the status light on the receiver is flashing, quickly press the connect button on the keyboard.
4.
While the status light on the receiver is flashing, quickly press the connect button on the mouse.
ENWW
Synchronizing the Wireless Devices
5