Installing and Configuring the ACL Tape Drive for the
NonStop S-Series Server
M8501 and M8502 ACL Tape Drive Installation and User’s Guide — 529972-003
A -12
Configuration
2. Press the
Drive 1 LTO Loaded
button.
3. Press the
Drive Identification
button.
4. View the
World Wide Port 0 Name
number. This number is used as the
PORTNAME in Step 5.
5. In SCF, issue this command:
SCF> ADD TAPE $tape, SENDTO STORAGE, LOCATION (group, module,
slot), SAC sac-id, PORTNAME 64-bit-portname, LUN lun-id
Example:
SCF> ADD TAPE $TAPE1, SENDTO STORAGE, LOCATION (110,2,3), SAC
1, PORTNAME 50060B00002E0934, LUN 0
6. To start the ACL tape drive on the server, issue this command in SCF:
SCF> START TAPE $tape
Example:
SCF> START TAPE $TAPE1
For complete details about the ADD and START commands, including command
syntax, see the
SCF Reference Manual for the Storage Subsystem.
Note.
The LUN (logical unit number) for all Fibre Channel tape storage devices directly
attached to an IOAM enclosure is 0.
