HP LT3200 Service Manual Download Page 90

Page: 90 / 102

HP High-Definition LCD TV Service Manual

Troubleshooting Tips

No Power

•

Check the power supply unit (PSU) – Is the PSU board defective?

•

Is the power cord connector grounded?

•

Check the cable between the PSU board and the main board.

•

Is the keypad/remote control power button working?

•

Is the power connector connected?

No Video

•

Is there an input source connected?

•

Is the LED on?

Check the main board and panel cable connection.

Is the power on?

Is there battery in the remote control?

Keypad abnormal

•

Is the button working properly?

•

Check whether the LED is on.

•

Check module.

•

Check the cable and main board connection.

LED Display abnormal

•

If the LED is off/dark/abnormal – check main board or cable.

•

If the LED flickers – Power saving mode in VGA: push any key to restart.

Abnormal Display

•

Missing Line:

Check the cable between the main board and the control board

Check the panel board

•

Bright Dot/Dark Dot/Light Leakage/Mura (cloudiness)/Image Sticking/Brightness spot/Particles/Dot Defect – Check
panel

•

No Display – Check the main board, inverter board, and panel board.

•

Display Noise:

Check the cable between the main board and the control board.

Check the panel board.

•

Flicker/Image too dark – Check main board or inverter board, load default settings.

•

Gray value display – Check main board or panel cable, load default settings.

•

VGA no image – Check main board or D-sub cable: is NB switch to LCD monitor?

Summary of Contents for LT3200







































































































Search results

Summary of Contents for LT3200

Reviews:

Related manuals for LT3200

Brands by name

Popular brands

HP LT3200, Service Manual

Search results

Summary of Contents for LT3200

Reviews:

Related manuals for LT3200

Brands by name

Popular brands