32. Enter the command:
ifdown ethX
NOTE: The
X
in
ethX
should be the number corresponding to the NIC you are
working with.
33. Enter the command:
rmmod eepro100
34. Enter the command:
ifup ethX
NOTE: The
X
in
ethX
should be the number corresponding to the NIC you are
working with.
35. Enter the command:
/etc/rc.d/init.d/network restart
36. Confirm that the driver listed in "lsmod" is e100
37. Run
ifconfig ethX
, and try to ping the address assigned to this adapter to verify
that the interface is working correctly, followed by a ping to another device on the
network.
38. Installation of Red Hat Linux 8.0 Professional is complete.
On-Line Information and Software Sources
Red Hat Inc., web access: http://www.redhat.com
HP web access: http://www.hp.com
6
