Problem
Possible Cause
Solution
The HP Display LiteSaver may not be
compatible with the computer
system. Some notebook computers
are not compatible and the monitor
power can not be controlled.
Confirm that the HP Display LiteSaver is compatible with the
system.
1
.
Right-click on the
HP Display LiteSaver
icon in the
system tray.
2
.
Select
Power Off Display
from the menu.
The monitor screen should turn off if the system is
compatible. To turn the monitor back on, wait 5 seconds
and move the mouse.
NOTE:
If the monitor did not turn off, then the
computer graphics driver is not compatible with the
HP Display LiteSaver software.
The monitor is off but it did The monitor's power saving control Check the monitor's OSD menu setting for power saving
not seem to enter into a low- is disabled.
enable/disable controls. The control should be set to enable
power sleep mode.
to allow the monitor to enter into low-power modes.
Using the Worldwide Web
For the online access to technical support information, self-solve tools, online assistance, community forums
of IT experts, broad mutlivendor knowledge base, monitoring and diagnostic tools, go to
http://www.hp.com/support
Preparing to Call Technical Support
If you cannot solve a problem using the troubleshooting tips in this section, you may need to call technical
support. Have the following information available when you call:
●
The monitor
●
Monitor model number
●
Serial number for the monitor
●
Purchase date on invoice
●
Conditions under which the problem occurred
●
Error messages received
●
Hardware configuration
●
Hardware and software you are using
ENWW
Using the Worldwide Web 31
