manualshive.com logo in svg

HP L1520 - 15 Inch LCD Monitor, User Manual

Share
Download
HP L1520 - 15 Inch LCD Monitor User Manual Download Page 6

English 5

hp L1520/hp L1720/hp L1820 LCD Monitor

What the hp L1520 Monitor Offers

What the hp L1520 Monitor Offers

The HP L1520 monitor is a liquid crystal display (LCD) 15-inch, high 
resolution, multi-synchronous color monitor. Multi-synchronous means 
that the monitor can be used with a range of video modes. It is 
optimized for use with all HP computers.

The HP L1520 monitor has the following features:

•  A 15-inch LCD; thin film transistor (TFT) with an anti-glare, hard 

coated surface

•  Support of video modes up to 1024 x 768 at a 75 Hz refresh rate
•  Analog/Digital interface: a VGA (analog) and a DVI-D (digital) 

connector enables connection to up to two computers at the same 
time.

Full scan TFT screen that 

gives edge-to-edge image

Menu

Right Browse/Contrast

Auto/Select

Anti-glare surface

On/Off

Status LED indicator

Slim and space-saving

Left Browse/Brightness

l15_7_820.fm  Page 5  Tuesday, June 11, 2002  12:39 PM

Summary of Contents for L1520 - 15 Inch LCD Monitor


























































Reviews:

No comments

Brands by name

Popular brands

Load more brands