EL-MF877-00 Page 2
Template Revision A
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components
and materials requiring selective treatment can be removed.
Tool Description
Tool Size (if
applicable)
Torx driver (standard)
T10 and T15
Small adjustable wrench.
5mm
Wire cutter
Medium
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:
1. Remove screws (T10) on chassis top side and remove top cover.
2. Remove black cable connecting to stack-up PCA.
3. Remove screws that fasten stack-up PCA onto standoffs.
4. Remove stack-up PCA.
5. Cut cable ties.
6. Remove screws (T10) on power supply top side and remove power supply top cover.
7. Remove power supply cable connectors.
8. Remove screws (T10 and T15) that fasten power supply onto chassis and screws/nuts (T10 and wrench) that fasten
onto chassis rear panel.
9. Remove power supply unit.
10. Remove screws (T10 and wrench) that fasten PCAs (main, LED and console), sheetmetal parts and fan tray
assembly.
11. Remove sheetmetal parts and accessory PCAs (LED and console).
12. Unplug fan tray cable connector and remove fan tray assembly.
13. Remove main PCA (last item).
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).
