HP J4813A, User Manual

Page: 95 / 144

3-41
Using Identity Driven Manager
Configuring User Access
a. Select the
Location
where the global rule will be applied, or "
ANY
".
b. Select the Time when the global rule will be used, or "
ANY
".
c. Select the
System
where the global rule will be used, or "
ANY
"
d. In the Access Profile field, select the access profile where the global
rule will be used.
e. If
Endpoint integrity
is enabled, select the option that indicates when
the rule will be applied, relative to the endpoint integrity status (
Pass
,
Fail
, or
Any
)
3. Click
Ok
to save your changes and close the
New Global Rule
window
4. The new global rule appears in the
Global Rules
list.
5. Similar to access rules, the global rules are evaluated in the order they are
listed in the Global Rules table. Use the
Move Up
or
Move Down
button in
the toolbar to arrange the rules in the order you want them to be applied.
IDM checks each rule in the list until a match on all parameters is found,
then applies the matching rule.
Changing Global Rules
To edit Global Rules:
1. Navigate to the Global Rules window.
2. Select the rule you want to modify in the
Rules
list.
3. Click the
Edit Global Rule
icon to display the
Edit Global Rules
window.
4. Change the desired values, as explained for New Global Rule (on the
previous page).
5. Click
Ok
to save the changes and close the
Edit Global Rules
window.
To delete a Global Rule:
1. Navigate to the Global Rules window.
2. Select the rule you want to delete in the
Rules
list.
3. Click the
Delete Global Rule
icon in the toolbar.
4. Click Yes in the confirmation pop-up to complete the process.
The rule is removed from the Global Rules list.