QuickSpecs
HPE Integrity Superdome X
Ordering and Configuration
Page 12
−
PDUs used have:
4 wire, IEC 309 60A connector, qty. 2 needed. (power option #004)
5 wire, IEC309 32A connector, qty. 2 needed. (power option #005)
•
Three Phase only (three phase cords that connect directly to customer provided receptacles)
4 wire version utilizes NEMA L15-30R connectors: (power option #002)
5 wire version utilizes IEC309 16A 5 pin connectors: (power option #003)
−
A total of 4 cords are necessary to power the 12 power supplies in the Superdome
Enclosure.
Below is a photo of the rear of a Superdome Enclosure with the three phase power interface modules
installed:
All these options are offered for HPE Superdome X.
All PDUs supported in the HPE Superdome X are half depth such that two can fit in 1U (one in the front and
one in the back). Many of the PDUs are offered in both 1U (horizontally mounted) and 0U (side-mounted)
options. The three phase PDU's for the Superdome Enclosure are AF511A or AF518A.
Specifying power option #007 in conjunction with any of the others (#001 - #006) routes the power cords
to exit the top of the rack rather than the bottom.
