HP Integrity rx6600, Installation Manual

Page: 76 / 84

Guide at I/O Cards and Networking Software on the HP website at http://www.hp.com/go/
integrity-iocards-docs .
Click the link for your HP-UX version. Support guides are listed alphabetically in the “User guide”
section.
Comparing the Utilities
Table 17 lists the supported features and procedures for the
ACU
and
ORCA
utilities.
NOTE: Yes in the appropriate column indicates that the feature or procedure is supported, while
No indicates that the feature or procedure is not supported.
Table 17 ACU and ORCA Supported Features and Procedures
ORCA ACU
Supported Features
No Yes Uses a graphical interface
No Yes Available in languages other than English
No Yes Available on CE
No Yes Uses a wizard to suggest the optimum configuration for an unconfigured controller
No Yes Describes configuration errors
No Yes Suitable for configuration while online
Yes No Suitable for configuration while offline
Supported Procedures
Yes Yes Creation and deletion of arrays and logical drives
Yes Yes Assignment of RAID level
No Yes Sharing of spare drives among several arrays
No Yes Assignment of multiple spare drives per array
No Yes Setting of stripe size
No Yes Migration of RAID level or stripe size
No Yes Configuration of controller settings
No Yes Expansion of an array
No Yes Creation of multiple logical drives per array
ORCA Utility
To use
ORCA
, follow these steps:
1. Power on the server. POST runs, and any array controllers that are in the server are initialized
one at a time. During each controller initialization process, POST halts for several seconds
while an
ORCA
prompt message displays.
76 Installing the System