HP Integrity rx4640, User'S & Service Manual

Page: 147 / 197

Booting the Operating System
Booting and Shutting Down HP-UX
Appendix B
147
When accessing the console, confirm that you are at the EFI Boot Manager menu (the main EFI
menu). If you are at another EFI menu, choose the
Exit
option from the submenus until you return
to the screen with the
EFI Boot Manager
heading.
From the EFI Boot Manager menu, choose the
EFI Shell
menu option to access the EFI Shell
environment.
Step 2. Access the EFI System Partition (
fs X :
where
X
is the file system number) for the device from which
you want to boot HP-UX.
Step 3. When accessing the EFI System Partition for the desired boot device, issue the
HPUX
command to
initiate the
\EFI\HPUX\HPUX.EFI
loader on the device you are accessing.
Step 4. Boot to the HP-UX Boot Loader prompt (
HPUX>
) by pressing any key within the 10 seconds given for
interrupting the HP-UX boot process. Use the
HPUX.EFI
loader to boot HP-UX in single-user mode
in the next step.
After you press a key, the
HPUX.EFI
interface (the HP-UX Boot Loader prompt,
HPUX>
) launches.
For help using the
HPUX.EFI
loader, enter the
help
command. To return to the EFI Shell, enter
exit
.
fs0:\> hpux
(c) Copyright 1990-2002, Hewlett Packard Company.
All rights reserved
HP-UX Boot Loader for IA64 Revision 1.723
Press Any Key to interrupt Autoboot
\efi\hpux\AUTO ==> boot vmunix
Seconds left till autoboot - 9
[User Types A Key to Stop the HP-UX Boot Process and Access the HPUX.EFI Loader ]
Type ’help’ for help
HPUX>
Step 5. At the
HPUX.EFI
interface (the HP-UX Boot Loader prompt,
HPUX>
) enter the
boot -is vmunix
command to boot HP-UX (the
/stand/vmunix
kernel) in single-user (
-is
) mode.
HPUX> boot -is vmunix
> System Memory = 4063 MB
loading section 0
................................................... (complete)
loading section 1
........ (complete)
loading symbol table
loading System Directory(boot.sys) to MFS
....
loading MFSFILES Directory(bootfs) to MFS
......
Launching /stand/vmunix
SIZE: Text: Data:3715K + BSS:3637K = Total:33306K
Console is on a Serial Device
Booting kernel...
Step 6. Exit the console and iLO MP interfaces when finished using them.
Press
Ctrl+B
to exit the system console and return to the iLO MP Main Menu. To exit the iLO MP,
enter
X
at the Main Menu.