System Unit
Dimensions
Height
14.42 in (36.63 cm)
Depth
20.05 in (50.93 cm)
Width
4.10 in (10.41 cm)
Shipping Dimensions
Height
21.50 in (54.61 cm)
Depth
23.13 in (58.75 cm)
Width
9.94 in (25.25 cm)
Weight
Maximum
38 (17 kg)
Temperature Range
*
Operating
10° to 35° C (50° to 95° F)
Non-Operating
-40° to 60° C (-40° to 140° F)
Storage
-20° to 60° C (-4° to 140° F)
Maximum Wet Bulb
Temperature
30° C (86° F)
Relative Humidity
**
Operating
10% to 90%
Shipping
10% to 90%
Storage
10% to 95%
*All temperature ratings shown are for sea level. An altitude derating of 1°C per 304.8 m (1.8°F
per 1,000 ft) to 3048 m (10,000 ft) is applicable. No direct sunlight allowed. Upper operating limit
is 3,048m (10,000 ft) or 70 Kpa/10.1 psia. Upper non-operating limit is 9,144 m (30,000 ft) or 30.3
KPa/4.4 psia.
**Storage maximum humidity of 95% is based on a maximum temperature of 45°C (113°F).
Altitude maximum for storage corresponds to a pressure minimum of 70 KPa.
SAS RAID LSI 1068
Controller
Disk Drive and
Enclosure Interface
3G SAS (Serial Attached SCSI)
SAS Connectors
1 internal mini-SAS x4 wide port connector
Server Interface
PCI-X 66MHz 64-bit provides 0.5GB/s maximum bandwidth
SAS Speed
x4 3G SAS provides 1.2GB/s maximum bandwidth.
Cache Memory
No cache memory supported
Logical Drives
Supported
Up to 32 logical volumes
Maximum Logical Drive
Capacity
584GB (4 x 146GB)
Host Memory
Addressing
64-bit, supporting greater than 4GB server memory space
RAID Support
RAID 1 (Mirroring)
Upgradeable Firmware
Upgradeable Firmware
QuickSpecs
HP Integrity BL870c Server Blade
Technical Specifications
DA - 12926 Worldwide QuickSpecs — Version 1 — 2.11.2008
Page 26
